General Information 2-1
2. General Information
2.1 Product Assistance
Help on installation, calibration, and the use of LeCroy equipment is available from your
local LeCroy office, or from LeCroy’s
• Customer Care Center, 700 Chestnut Ridge Road, Chestnut Ridge,
New York 10977–6499, U.S.A., tel. (845) 578–6020
• European Service Center, 4, Rue Moïse Marcinhes, Case postale 341, 1217 Meyrin 1,
Geneva Switzerland, tel. (41) 22/719 21 11.
• LeCroy Japan Corporation, Sasazuka Center Bldg – 6
th
floor, 1-6, 2-Chome,
Sasazuka, Shibuya-ku, Tokyo Japan 151-0073, tel. (81) 3 3376 9400
2.2 Installation for Safe and Efficient Operation
Operating Environment
The oscilloscope will operate to its specifications if the environment is maintained within
the following parameters:
Temperature ................5 to 40 °C (41 to 104 °F) rated.
Humidity.......................Maximum relative humidity 80 % RH (non-condensing) for
temperatures up to 31 °C decreasing linearly to 50 % relative humidity
at 40 °C
Altitude .........................2000 m (6560 ft)
The oscilloscope has been qualified to the following EN61010-1 category:
Installation (Overvoltage) CategoryII
Pollution Degree.............................2
Safety Symbols
Where these symbols or indications appear on the front or rear panels, and in this
manual, they have the following meanings
:
To Next Page
Loading...
Need help?
General
