6-20 Maintenance
6.4.2.5 Updating the hard disk (through a network)
<Required items>
1. PC (DVD-ROM drive and network interface card required; OS: Windows 2000
or XP)
2. Network cable
3. USB floppy disk drive
4. Floppy disk labeled as "Startup Disk for WS400 Series Control Program"
5. Master DVD labeled as "WS400 Series Control Program (for loading on the
hard disk)"
6. WaveSurfer
7. PS/2 keyboard & mouse
(1) Connect the USB floppy disk drive, PS/2 keyboard & mouse, and the network
cable to the waveSurfer. (See Figure 6.4)
Do not connect the PC to the
intra-company network.
waveSurfer PC
Network cable
Cross connection
USB floppy disk drive
Keyboard&mouse
USB DVD-ROM drive
Figure 6.4 Connecting waveSurfer with PC
(2) Insert the "Startup Disk for WS400 Series Control Program" to the USB floppy
disk drive.
(3) Turn on the power to the waveSurfer.
(4) If the following message appears on the screen, enter the user name to log in to
the PC.
Type your user name, or press ENTER if it is WS002:
(5) If the following message appears, enter the password to log in to the PC.
Type your password:
(6) If the following message appears, enter "N". ****** stands for the user name
entered in Step (4) above.
There is no password-list for ******
Do you want to create one? (Y/N) [N]:
(7) If the following menu appears, choose 1.
Menu
To Next Page
Loading...
Need help?
General
