Leica mojo 3D User Manual

Leica mojo3D, Automatic Section Control 153
7.2 Setting the Overlap Limit
Definition The overlap limit sets how sensitive the auto section control is to misses and over-
laps. When the overlap limit is set to its default value of 100%, the section will turn
on whenever any part of the sensed area has not been applied.
If the overlap limit is decreased, the system will not turn on the application when
traversing a small missed area, such as a strip between two spray swaths.
100% 50% 25% 0%

Leica mojo 3D Specifications

General

Brand	Leica
Model	mojo 3D
Category	GPS
Language	English