Leica mojo 3D User Manual

Leica mojo3D, NMEA Output 227
11.1 Configuring NMEA Output
NMEA settings,
step–by–step
To configure advanced NMEA settings, carry out the following steps:
1. On the main navigation screen, tap on the Setup button.
2. On the flyout menu, tap the NMEA button.
The NMEA configuration screen appears.
3. Tap Output NMEA option button.
4. Tap or to set the baud rate.
5. In the sentence list, tap the NMEA
sentence name, then tap the
output rate required. Tap or
to reveal more choices in the
lists.

Leica mojo 3D Specifications

General

Brand	Leica
Model	mojo 3D
Category	GPS
Language	English