Lenze EVF9326 User Manual

Parameter setting
Parameter setting with the XT EMZ9371BC keypad
Display elements and function keys
7
7.2
7.2.3

7.2-3
EDSVF9333V EN 3.0-06/2005
7.2.3 Display elements and function keys
YZ
y
z
T V
S U
dABbc
p
SHPRG
Para
Code
Menu
0050
00
50.00_Hz
MCTRL-NOUT
0
1
3
4
5
6
7
8
2
9371BC002
Fig. 7.2-2 Display elements and function keys of the XT EMZ9371BC keypad
Display Meaning Explanation

Status display of basic device
 Ready for operation
 Pulse inhibit is active Power outputs inhibited
 Set current limit is exceeded in motor
or generator mode
 Speed controller 1 in its limitation Drive is torque-controlled
(only active for operation with
basic devices of 9300 series)
 Active fault

Parameter acceptance
 Parameter is accepted immediately Basic device operates immediately
with the new parameter value
SHPRG  Parameter must be confirmed with

Basic device operates with the
new parameter value after being
confirmed
SHPRG When the controller is inhibited t he
parameter must be confirmed with

Basic device operates with the
new parameter value after the
controller is re-enabled
None Display parameter Change is not possible

Active level
Menu Menu level is active Select main menu and submenus
Code Code level is active Select codes and subcodes
Para Parameter level is active Change parameters in the codes or
subcodes
None Operating level is active Display operating parameters

Short text
alphanumeric
Contents of the menus, meaning of
the codes and parameters
In the operating level C0004 (in %)
and the active fault are displayed

Number
Menu level With active level:
Menu number
Only active for operation with
basic devices of 8200 vector or
8200 motec series
Code level With active level:
Four-digit code number
Displays

Lenze EVF9326 Specifications

General

Brand	Lenze
Model	EVF9326
Category	DC Drives
Language	English