HDMI-TPS-RX110AY – User's Manual 36
Description
Example
Command {F}
{f}
Legend
Connection Test
Description: Simple test to see if the connection is established successfully.
Example
Command {PING}
{ping}
(PONG!)
View Serial Number
Description: The device responds its 8-digit serial number.
Example
Command {S}
{s}
(SN:5A004254)
Compile Time
Description
Example
Command {CT}
{ct}
(Compiled: Sep 30 2016 14:07:56)
View Installed Board
Description: Shows the hardware name and revision of the installed cards.
Example
Command {IS}
●0●
●
{is}
Explanation: The device reports its motherboard (slot 0).
Description
Example
Command {FC}
Response (CF●
(CF●
…
{fc}
(CF HDMI-TPS-RX110AY 1.0.0b3)
Explanation: The device has one control panel.
Restart the Device
Description: The device can be restarted without unplugging power.
Example
Command {RST}
Response
{RST}
Explanation: The device reboots; no response is sent in this case.
Description: Internal voltages and measured temperature values are shown.
Example
Command {ST}
Response (ST●
{ST}
42.55C)
Description: Settings can be reset to factory default values as follows:
Example
{factory=all}
Explanation: All settings and parameters are reset to factory default, see the table in the Factory Default
Settings section.
To Next Page
Loading...
Need help?
General
