EasyManuals Logo
Home>Lightware>Receiver>HDMI-TPS-RX110AY

Lightware HDMI-TPS-RX110AY User Manual

Lightware HDMI-TPS-RX110AY
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
1. Introduction HDMI-TPS-RX110AY – User's Manual 7


High bandwidth allows extension of resolutions up to 4K and even 3D sources and displays
are supported.
Signal Transmission up to 170 m
            
CAT5e…CAT7e cable.
Pixel Accurate Reclocking
Each output has a clean, jitter free signal, eliminating signal instability and distortion caused


The exact video and audio signal format can be determined such as timing, frequencies, scan
mode, HDCP encryption, color range, color space and audio sample rate.
HDCP-compliant

disabled when non-protected content is extended.
Built-in Event Manager
             
             
complex environment, there is no need to invest in additional control solutions, which makes
the receiver the best choice for numerous applications.
Remote Power
The receiver is PoE-compatible and can be powered locally by the supplied power adaptor, or
remotely via the TPS connection (through the CATx cable) with a compatible power source
equipment, e.g. MMX6x2-HT series matrix switchers and TPS2 matrix boards.
RS-232
Bi-directional RS-232 Pass-through

through supports any unit that works with standard RS-232.
RELAY
Relay

Ethernet Control


Typical Application
Standalone Application Diagram
Integrated System Diagram
HDMI-TPS-RX110AY
UMX-TPS-TX140
RS-232
IR
LAN
LAN
Analog
audio
Volume
control
HDMI
Projector
Active speakers
Wi-Fi access point
Electric
projector
screen
12V DC
1.5A
---
_
PIN: 2mm
12V DC
1.5A
---
_
AUDIO OUT
HDMI OUT
SIGNAL AUDIO
TPS IN (PoE)
TPS Receiver with Relay modules and Audio de-embedding
HHDDMMII--TTPPSS--RRXX111100AAYY
Made in EU, Hungary
RoHS
For best performance use AWG23
CAT6 or CAT7 SFTP cable
Device can be remote powered over TPS link with PoE
(IEEE 802.3af)
Sn:
Front LEDs
LIVE
RS-232
Fast blinking (0.5 sec): Firmware upgrade mode
ON: Powered but no operation
OFF: No power
OFF: Pass-through mode
Blinking (1 sec): Normal operation
Blinking: Command Injection mode
ON: Control mode
OFF: No TPS link
TPS LINK
Blinking: Low power mode
ON: TPS link active
AUDIO OUT
OFF: Embedded audio not present or muted
Blinking: Embedded audio format not supported
for audio de-emebedding
ON: Embedded audio present and de-embedded
HDCP
Blinking: Non HDCP capable device connected,
encrypted signal replaced with red screen
Rear LEDs
SIGNAL
ON: Signal present
OFF: Output signal not present or muted
TPS INPUT
HDMI OUTPUT
OFF: Output signal not HDCP encrypted
ON: Output signal HDCP encrypted
- Remote power (PoE)
- TPS Link
IR
emitter
12V DC
Power
adaptor
12V DC
Power
adaptor
Remote
control
PC
MacBook
VGA Laptop
DVI
Media player
TPS
(up to 170 m)
IR detector
VGA
DisplayPort
HDMI
PIN: 2.1mm
GPIO
RS-232
TX RX
AUDIO2 IN
DVI-I IN
IR IN IR OUT
LIVE
RS-232
SRVC
LINK
12V 1A DC
TPS OUT (PoE)
ETHER NET
1 2 3 4 5 6 7 8
PUSH TO EJECT
CD / USB / SD / AUX / BT / F M / AM
EJECT
SD
TEXT
LOCK
ALL/
FOLDER
RANDOM
REPEAT
AUX IN
POWER
USB
CD/USB/SD
AUX/ BT
STOP
PLAY
BT AAC
2 00:03:16
RELAY
Videoconference
codec
PC
Media player
HDMI-TPS-RX110AY
Control System
Ethernet Switch
RS-232
RELAY
LAN
LAN
LAN
LAN
Analog
audio
HDMI
Projector
Audio
amplifier
Speakers
Wi-Fi access point
Electric projector screen
12V DC
1.5A
---
_
PIN: 2mm
12V DC
1.5A
---
_
AUDIO OUT
HDMI OUT
SIGNAL AUDIO
TPS IN (PoE)
TPS Receiver with Relay modules and Audio de-embedding
HHDDMMII--TTPPSS--RRXX111100AAYY
Made in EU, Hungary
RoHS
For best performance use AWG23
CAT6 or CAT7 SFTP cable
Device can be remote powered over TPS link with PoE
(IEEE 802.3af)
Sn:
Front LEDs
LIVE
RS-232
Fast blinking (0.5 sec): Firmware upgrade mode
ON: Powered but no operation
OFF: No power
OFF: Pass-through mode
Blinking (1 sec): Normal operation
Blinking: Command Injection mode
ON: Control mode
OFF: No TPS link
TPS LINK
Blinking: Low power mode
ON: TPS link active
AUDIO OUT
OFF: Embedded audio not present or muted
Blinking: Embedded audio format not supported
for audio de-emebedding
ON: Embedded audio present and de-embedded
HDCP
Blinking: Non HDCP capable device connected,
encrypted signal replaced with red screen
Rear LEDs
SIGNAL
ON: Signal present
OFF: Output signal not present or muted
TPS INPUT
HDMI OUTPUT
OFF: Output signal not HDCP encrypted
ON: Output signal HDCP encrypted
- Remote power (PoE)
- TPS Link
MMX6×2-HT210
ETHER NET
Volume
control
1 2 3 4 5 6 7 8
PUSH TO EJECT
CD / USB / SD / AUX / BT / F M / AM
EJECT
SD
TEXT
LOCK
ALL/
FOLDER
RANDOM
REPEAT
AUX IN
POWER
USB
CD/USB/SD
AUX/ BT
STOP
PLAY
BT AAC
2 00:03:16
TPS
(up to 170 m)

Table of Contents

Other manuals for Lightware HDMI-TPS-RX110AY

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lightware HDMI-TPS-RX110AY and is the answer not in the manual?

Lightware HDMI-TPS-RX110AY Specifications

General IconGeneral
BrandLightware
ModelHDMI-TPS-RX110AY
CategoryReceiver
LanguageEnglish

Related product manuals