HDMI-TPS-RX110AY – User's Manual 39
RS-232 settings
Set RS-232 Mode
Description: RS-232 mode can be set as follows. See more details about RS-232 modes in the Serial Interface
section.
Example
Legend
CI = Command Injection mode;
PASS = Passthrough.
Set Local RS-232 Parameters
Description: The parameters of local RS-232 port can be set as follows.
Example
Legend:
<Parameter> Parameter Values
Baud rate X (no change); 4800; 7200, 9600; 14400; 19200; 38400;
57600; 115200
Data bit X (no change); 8; 9
Parity X (no change); N (None); E (Even); O (Odd)
Stop bit X (no change); 1; 1,5; 2
Explanation
changed, remained 1.
Set Link RS-232 Parameters
Description: The parameters of RS-232 TPS link port can be set as follows.
Example
Legend: see previous section.
Explanation: RS-232 TPS link port is set the baud rate to 9600, data bit to 9, parity to odd, and stop bit is not
changed, remained 1.
Set Local RS-232 Control Protocol Port
Description: The control protocol of local RS-232 port can be set as follows.
Example
Legend
Set Link RS-232 Control Protocol Port
Description: The port number of RS-232 TPS link port can be set as follows.
Example
Legend
To Next Page
Loading...
Need help?
General
