General instructions
1.6 Definition of direction information
16.11.2018
Maintenance manual 3 302 756 en 1 - 5
GMK6400
1.6 Definition of direction information
Basic rule Directions always depend on whether the carrier or the superstructure is
being operated.
On the carrier
The driver's cab is always at the front, which means that:
Forwards always means the driver's cab is to the front.
Backwards always means the rear lights on the carrier are leading.
On the superstructure
The main boom head is always at the front, which means that:
Switches and
buttons
For switches and buttons, the terms at the bottom and top are used.
Regardless of the fitting position (vertical, horizontal, diagonal, perpen-
dicular or turned), the following always applies:
1: front 2: right
3: rear 4: left
1: front 2: right
3: rear 4: left
Down: press (1) – next to the symbol
Up: press (2) – opposite the symbol