Manitowoc GROVE GMK6400 User Manual

Maintenance work on the carrier
7.19 Other maintenance work
16.11.2018
Maintenance manual 3 302 756 en 7 - 133
GMK6400
7.19.3 Checking the functioning of the auxiliary heater
Depending on the equipment, your truck crane has been fitted with an
auxiliary heater.
During the warm summer months, run the auxiliary heating system for
20
to 30 minutes; à Operating manual.
• Check that the system is working properly. Also check the functionality of
the controls.
• If the heating system is not working correctly, report it to
Manitowoc Crane Care or an authorised GROVE dealer or an
authorised specialist workshop.
7.19.4 Lubricating the cab door
Grease, tools
– Grease gun from the tool set.
Lubrication
• Open the doors on the driver and passenger
side.
• Clean the grease nipples (1) on the door
hinges.
• Press grease into the grease nipples.
• Close and open the doors several times –
the
doors should move easily.
• Remove any grease that has escaped.
• If the doors are stiff or do not close properly after lubrication, have them
adjusted by
Manitowoc Crane Care or by an authorised GROVE dealer.
M 1
M 12
Lubricating
grease
Designation
to DIN 51502
Specifications
Classification
GROVE part no.
Grease KP - 1K - 50 DIN 51825 03233369

Manitowoc GROVE GMK6400 Specifications

General

Brand	Manitowoc
Model	GROVE GMK6400
Category	Construction Equipment
Language	English