Manitowoc GROVE GMK6400 User Manual

Maintenance work on the carrier
7.7 Transfer case
7 - 54 3 302 756 en Maintenance manual
GMK6400
16.11.2018
Checking
• Unscrew the screw (1).
• Check that the oil reaches the lower edge of
the opening.
• Fit a new gasket and tighten the screw.
If the oil level is too low
• Top up the oil; à p. 7 - 55.
7.7.3 Changing the oil
Oil, spare parts,
tools
– Receptacle, about 20 l (5.0 gal); à p. 2 - 4.
Prerequisites – The truck crane must be raised on outriggers or parked over an inspec-
tion pit.
– The engine must not be running and must be secured against unauthor-
ised use; à p. 2 - 3.
M 6
Gear oil
in litres (gal)
Designation
to DIN 51502
Specifications
Classification
GROVE part no.
8 (2.1) C - LPF MIL-L 2105 B
API-GL-5
Viscosity:
Hyp SAE 90
ISO - VG 220
00552891
Designation Quantity GROVE part no.
Gasket 16 x 20 Cu DIN 7603 1 00117134
Gasket 30 x 36 Cu DIN 7603 1 00117151

Manitowoc GROVE GMK6400 Specifications

General

Brand	Manitowoc
Model	GROVE GMK6400
Category	Construction Equipment
Language	English