Manitowoc GROVE GMK6400 User Manual

Maintenance work on the carrier
7.3 Engine
16.11.2018
Maintenance manual 3 302 756 en 7 - 15
GMK6400
7.3.2 Topping up the oil
Data on the prescribed oil specification;
à Engine manufacturer's documentation.
Oil
Prerequisites – The truck crane must be level.
– The engine must not be running and must be secured against unauthor-
ised use; à p. 2 - 3.
Topping up the oil
• Add oil through the filler neck (2) up to the
max. mark.
• Close the filler neck with the cap.
• Insert the dipstick (1) into the dipstick tube
after checking the oil level.
Engine oil
in litres (gal)
Designation
to DIN 51502
Specifications
Classification
GROVE part no.
27 (7.1) HD - CD MIL-L 2104 C
DB 228.5
SAE 5 W-30
03329588
S
Risk of damage to the engine if the oil level is too high!
Do not overfill with oil; the oil level must not be higher than the max. mark
(arrow marking). Drain off oil if necessary;
à Engine manufacturer's
documentation
.
G
Risk of burns when the engine is hot!
During operation, the engine and add-on parts reach temperatures up
to
400 °C (750 °F). Wear appropriate protective gloves and be careful not
to
touch hot parts.

Manitowoc GROVE GMK6400 Specifications

General

Brand	Manitowoc
Model	GROVE GMK6400
Category	Construction Equipment
Language	English