Maintenance work on the carrier
7.6 Transmission
7 - 50 3 302 756 en Maintenance manual
GMK6400
16.11.2018
• Place a receptacle underneath the Screw (2)
on the power take-off.
• Unscrew bolts (1) and (2) and allow the oil to
drain.
• Clean the drain plugs.
• Replace the seal and tighten the drain
plug
(2) to a torque of 60 Nm (44.2 lbf ft).
Changing the
oil
filter
• Remove the screw (1) and cover (2).
• Pull out the filter (4).
• Place the filter in a receptacle.
• Clean all parts.
• Insert a new filter (4) into the housing.
• Replace the gasket (3).
• Fit the cover (2).
• Tighten the screws (1) – Torque 46 Nm
(34
lbf ft).
S
Risk of damage to the transmission!
Clogged oil filters lead to transmission damage. You must fit a new oil filter
at each oil change.
To Next Page
