Manitowoc GROVE GMK6400 User Manual

Maintenance work on the carrier
7.8 Axle lines
7 - 62 3 302 756 en Maintenance manual
GMK6400
16.11.2018
1st axle line
• Place a receptacle underneath the screw (2).
• Unscrew bolts (1) and (2) and allow the oil to
drain.
• Fit a new seal and tighten the screw (2).
• Fill the oil up to the lower edge of the
opening.
• Fit a new seal and tighten the screw (1).
2nd axle line
• Place a receptacle underneath the screws (3)
and (4).
• Remove the drain plugs (1), (2), (3) and (4)
and let the oil drain off.
• Replace the seals and tighten the screws (3)
and (4).
• Fill the oil up to the lower edge of the
opening (1).
• Replace the seals and tighten the screws (1)
and (2).
S
Risk of oil overheating!
When topping up the oil, both openings must be opened so that both oil
tanks are filled equally. This prevents the sumps from being overfilled and
thus the oil from overheating.

Manitowoc GROVE GMK6400 Specifications

General

Brand	Manitowoc
Model	GROVE GMK6400
Category	Construction Equipment
Language	English