Mindray A7 Operating Instructions

A7™ Operating Instructions 046-004667-00 3 - 41
System Interface Display Tab
3. Select the CO
2
Scale, AA Scale, O
2
Scale or N
2
O Scale button. If an aesthetic agent, such as
sevoflurane, is detected , the system displays Sev Scale instead of AA Scale.
4. Select the desired scale setting according to the table below:
5. If needed, select the Load Scales Defaults button and then select the Ye s button to restore
the factory default configurations. Select the Accept button to confirm the change, or select
the Cancel button to discard the change.
Waveform Display
To set the waveform display:
1. Select Setup softkey > Display tab.
2. Select the Waveform Display button.
3. Select the desired waveform.
4. Select the Accept button to confirm the change, or select the Cancel button to discard the
change.
GAS SCALES UNIT OF MEASURE SCALE
CO
2
Scale
mmHg
0-40 0-60 0-80
kPa
0.0-5.0 0.0-8.0 0.0-10.0
%
0.0-5.0 0.0-8.0 0.0-10.0
O
2
Scale
%
0-35 0-50 0-100
N
2
O Scale
%
0-35 0-50 0-100
Des Scale
%
0.0-6.0 0.0-9.0 0.0-18.0
Sev Scale
%
0.0-2.0 0.0-4.0 0.0-8.0
Iso Scale
%
0.0-1.2 0.0-2.5 0.0-5.0
Hal Scale
%
0.0-1.2 0.0-2.5
0.0-5.0
Enf Scale
%
0.0-1.2 0.0-2.5 0.0-5.0
TABLE 3-8 Gas Scales
GAS SCALE FACTORY DEFAULT SCALE
CO
2
Scale
0-60 mmHg 0.0-8.0 kPa 0.0-8.0 %
O
2
Scale 0-100 %
N
2
O Scale 0-100 %
Des Scale 0-9.0 %
Sev Scale 0-4.0 %
Iso Scale 0-2.5 %
Hal Scale 0-2.5 %
Enf Scale 0-2.5 %
TABLE 3-9 Factory default scale

Mindray A7 Specifications

General

Brand	Mindray
Model	A7
Category	Medical Equipment
Language	English