A7™ Operating Instructions 046-004667-00 1 - 21
Product Description Physical Views
1.2.9 Passive Anesthetic Gas Scavenging System (AGSS) (Right
View)
FIGURE 1-11 Passive AGSS (Right View)
H5 Float Indicates exhaust flow. Adjusted by turning the Flow Adjust
Knob (H2) until the float is between the Min and Max marks.
H6 Inlet Port Cover The inlet port is used to connect ACGO circuits that require
gas scavenging to the AGSS.
CAUTION: Keep the inlet port cover closed when the
ACGO circuit is not used.
PART(S) DESCRIPTION
PART(S) DESCRIPTION
I1 Inlet Port Intake for exhaust gases from the breathing system
connecting with the AGSS ports.
I2 Exhaust Port Exhaust port to the hospital’s waste gas scavenging system.
I3 Manual Bag When the manual bag is inflated, it indicates that the passive
AGSS is blocked.
I2
I3
I1
Rear View
To Next Page
Loading...
Need help?
General
