Attention Symbols Abbreviations, Symbols, and Units of Measure
E - 6 046-004667-00 A7™ Operating Instructions
E.4 Attention Symbols
The following figures provide descriptions of symbols of Attention that are used on the device and/or
within this manual.
FIGURE E-1 Main Unit (Front View)
ATTENTION!
NUMBER DESCRIPTION
01 Auxiliary work surface. When the drawer is closed, depress the auxiliary work surface
inward to pull it out.
Maximum supporting weight: 10 kg (22 lbs)
NOTE: This equipment is configured with auxiliary work
surface only when electronically controlled ACGO
is configured.
02 Only vaporizers with Selectatec Interlock-Systems may be used with the A7 unit.
Use vaporizers compliant to ISO 80601-2-13. See chapter "Accessories". Refer to the
vaporizer manufacturer’s Instructions For Use for filling or draining the vaporizer and
other information.
Use care in lifting and manipulating vaporizers during the mounting process as their
weight may be greater than expected, based on their size and shape.
03 Remove the absorber canister first. Then press inward the fasteners on both sides and
the CO
2
bypass assembly will drop down indicating that the breathing system block is
unlocked. In this case, you can firmly separate and slide it away from its mounting arm
while holding the sides of the breathing system block.
01
02
03
To Next Page
Loading...
Need help?
General
