To Next Page

To Previous Page

A7™ Operating Instructions 046-004667-00 3 - 25

System Interface Ventilation Mode Tabs

3.7 Ventilation Mode Tabs

Displays tabs for all ventilation modes. Each tab displays the ventilation mode and its parameters.

(FIGURE 3-31 to FIGURE 3-37)

A7 ventilation modes:

• Volume Control Ventilation (VCV)

• Synchronized Intermittent Mandatory Ventilation with VC mode (SIMV-VC)

• Pressure Control Ventilation (PCV)

• Synchronized Intermittent Mandatory Ventilation with PC mode (SIMV-PC)

• Pressure Support ventilation (PS)

•Manual

• Bypass

• Monitor (with AG module)

FIGURE 3-31 Ventilation Mode Tabs

To change the ventilation mode:

1. Select a desired ventilation mode tab. The Set Mode softkey begins to blink green.

2. Optionally, select one or more parameter buttons to change the parameter settings of the

desired ventilation mode. Select the Accept button to save each parameter change.

3. Select the Set Mode softkey to finalize and change the ventilation mode.

NOTE: If the Set Mode softkey is not selected after several seconds, an

audible reminder is sounded, and then the desired ventilation

mode is cancelled.

FIGURE 3-32 Ventilation Mode: VCV

Ventilation Mode Tabs

Mindray A7 Operating Instructions

Other manuals for Mindray A7