Physical Views Product Description
1 - 20 046-004667-00 A7™ Operating Instructions
1.2.8 Active Anesthetic Gas Scavenging System (AGSS) (Top, Right,
and Rear Views)
FIGURE 1-10 Active AGSS (Top, Right, and Rear Views)
PART(S) DESCRIPTION
H1 Mounting Rail Attachment Allows the AGSS to be mounted on the side rail. Contains a
thumbscrew that must be tightened against the mounting
rail.
H2 Flow Adjust Knob Turn clockwise or counter-clockwise to adjust the flow in the
AGSS until the float is between Min and Max marks.
H3 Exhaust Port Exhaust port to the hospital’s waste gas scavenging system
H4 Inlet Port Intake for exhaust gases from the breathing system. An AGSS
transfer hose connects the Inlet and AGSS ports (see
FIGURE 1-3) to transfer the exhaust gases.
H1
H3
H4
H2
H5
Top View
Right View
Rear View
H6
To Next Page
Loading...
Need help?
General
