System Installation 3-3
3.1.3 Confirmation before Installation
Perform the following confirmation before installing the system:
1. The video format used in the region or country where the system is installed.
2. The language used in the region or country where the system is installed.
3. The power voltage used in the region or country where the system is installed.
4. Obstetric formulae and other measurement formulae used in the region or country where the
system is installed.
5. Other settings to be used in the region or country where the system is installed but different
from the factory settings.
6. The doctor’s habits of using the system.
Perform the confirmation above before installing the system. And set up the system to make it
according with the usage of the region or country where the system is installed.
3.2 Unpacking
Unpacking tool: a pair of scissors
Installation duration: 2 persons, 10 minutes.
3.2.1 Unpacking Process
1. Cut off 8 strips of the external package as shown below:
2. Remove the wooden cover from the close carton box, and lay down the cover as the slope in
front of the device. See the figure below.
To Next Page
Loading...
Need help?
General
