5-4
5.2 Set Date and Time
1. Select the system time field on the main screen to pop up time setup menu.
2. Set [Date] and [Time].
3. Set [Date Format] to [YYYY-MM-DD], [MM-DD-YYYY] or [DD-MM-YYYY].
4. Select [Time Format] and toggle between [24 h] and [12 h].
5.3 Adjust Screen Brightness
1. Select [Setup]→[Setting]→[Brightness/Volume].
2. Select [Day] or [Night] to choose the corresponding default screen brightness.
3. If the above screen brightness is not satisfactory, adjust the screen brightness by
selecting the + (increase) or – (decrease) button. The LCD brightness has 10 levels of
adjustment. If the ventilator is battery powered, you can select a less bright screen to
save battery capacity.
5.4 Adjust Key Volume
1. Select [Setup]→[Setting]→[Brightness/Volume].
2. Adjust the key volume by selecting the + (increase) or – (decrease) button. The key
volume has 10 levels of adjustment.
5.5 Set Tinsp/I:E
1. Select [Setup]→[Setting]→[System].
2. Select [Tinsp/I:E] and toggle between [Tinsp] and [I:E]. Based on your Tinsp/I:E
selection, corresponding Tinsp or I/E ventilation setting parameters are adopted for
V-A/C, P-A/C and PRVC modes.
5.6 Set IBW/Height
1. Select [Setup]→[Setting]→[System].
2. Select [IBW/Height] and toggle between [IBW] and [Height]. When the ventilator is
used on a new patient, the system calculates default values of TV, f, and fapnea in the
ventilation mode automatically based on the set IBW or height and gender.
To Next Page
Loading...
General