5-9
5.16 View System Information
5.16.1 Version Information
Select [Setup]→[Maintain]→[User]→enter the required password→[Syst. Info]→
[Versions] to view the version information of system software.
5.16.2 Configuration Information
Select [Setup]→[Maintain]→[User]→enter the required password→[Syst. Info]→[Config
Info] to view the configuration information of the ventilator such as ventilation mode.
5.16.3 Maintenance Information
Select [Setup]→[Maintain]→[User]→enter the required password→[Syst. Info]→
[Maintain] to view the system total running time, system startup time, CO
2
last calibration
time, O
2
sensor last calibration time, flow sensor last calibration time, time left for the next
turbine blower maintenance, and time of last maintenance.
5.17 Export
The ventilator’s export function means to export some data to USB memory.
5.17.1 Export Screen
Exporting screen means to export the last saved screen capture of the ventilator in the format
of “bmp”.
To export screen capture,
1. Insert the USB memory into the USB connector of the ventilator.
2. Select the desired screen to be exported and then press the [Freeze] key to capture the
screen.
3. Select [Setup]→[Export]→[Export Screen]. The system checks the availability of
USB memory. If the USB memory is available and has sufficient space, the system
exports the last captured screen.
4. After exporting is completed, select [Remove USB Memory] to remove the USB
memory.
To Next Page
Loading...
General