Tips 132
Improving Signal Strength
There are several ways you can improve the signal strength.
● Make sure you’re inside a network coverage area.
● Try reorienting your device.
● Move your device and your computer to another location — you may be in or near a
structure that is blocking the signal. Every obstacle (for example, walls, ceilings,
furniture) between the NETGEAR Zing Mobile Hotspot and other wireless devices
decreases the signal strength.
● Place your device in a centralized location, as high as possible in the room.
● Make sure there’s plenty of space around your device to provide the best signal
reception.
● Keep your device at least 3–6 feet away from electrical devices that generate RF
interference (for example, microwaves, TVs, 2.4 GHz cordless phones, cellular phones,
baby monitors, wireless speakers). If you’re not using these electrical devices, turn them
off.
● If possible, place your devices so that the signal passes through open doorways or
drywall, as opposed to concrete, brick, metal, walls with insulation, and so on.
● If you cannot obtain service, contact your wireless provider — a network or account
problem may be preventing you from obtaining service.
● Consider purchasing the desktop cradle for the NETGEAR Zing Mobile Hotspot from
your wireless provider or from the Sierra Wireless online store at
sierrawireless.com/eStore.
Improving 3G Network Service
To improve your network service, periodically check for PRL and profile updates.
The PRL (Preferred Roaming List) is an account configuration item set by your service provider.
It controls the radio channels and network carrier used by the 3G modem.
To check for these updates:
1. Log in to the home page. (See Logging In as an Administrator.)
2. Click Settings > Network > Preferences.
3. Click Update PRL.
To Next Page
Loading...
Need help?
General
