Device Basics 15
Turning Your Device Off
1. Press and hold the Power button until the Shut Down button appears.
2. Press the Shut Down button.
Controlling Your Device Using the Power Button
The power button supports two types of presses.
Removes device from standby (low power) mode.
Wakes up (turns on) the LCD if the LCD was dormant. (The LCD turns
dark, after a configurable time of inactivity.)
Long press (press
and hold for two
seconds)
Turns your device on.
Turns your device off.
Press the Shut Down button that appears on the screen to confirm
that your device should be turned off.
Restarting Your Device
If you need to restart your device for some reason, you can use these methods.
● Press and hold the Power button for two seconds.
● If the touchscreen is not responding, press and hold the Power button for five seconds.
● Remove and replace the battery.
LED
The LED status indicator shows the hotspot’s connection status.
● Blue single blink – Device is connected to network and Wi-Fi is ready.
● Blue double blink – Data is being transferred.
● Amber blink – Network is not ready. (Mobile broadband is disconnected, no signal is
available, or Wi-Fi is asleep.)
● Alternating orange and amber blink – Software updates being applied.
To Next Page
Loading...
Need help?
General
