Chapter 7 Specifications
7.6 Safety Standards Compliance
129
7.6 Safety Standards Compliance
Configuration of
Ti-E microscope,
with TI-PS100W Power
Supply or TE-PS30W
Power Supply A
• UL listed product.
• This product meets FCC Part 15B Class A requirements:
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
• This product complies with Canadian EMI. (ICES-003 Class A)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appreil numérique de classe A est conforme à la norme NMB-003 du Canada.
Configuration of
Ti-E microscope,
with TI-PS100W Power
Supply or TE-PSE30
Power Supply A
• CE marking
• This product meets EU IVD Directive requirements.
(GM-approved: in vitro diagnostic medical device)
• This product meets EU Low Voltage Directive requirements.
• This product meets EU EMC Directive requirements. (EN61326)
• This product complies with Australian EMC. (AS/NZS C1SPR11)
To Next Page
Loading...
Need help?
General
