Chapter 1 Part Names
1.4 PFS Motorized Nosepiece and PFS Offset Controller
19
1.4 PFS Motorized Nosepiece and PFS Offset Controller
The PFS Motorized Nosepiece (TI-ND6-PFS Perfect Focus Unit) is an integrated combination of a
motorized sextuple DIC nosepiece and a perfect focus system (PFS). The offset can be controlled with the
PFS Offset Controller.
PFS Motorized Nosepiece
OUT
DICHROIC MIRROR
IN
Figure 1-16 PFS Motorized Nosepiece
PFS Offset Controller
PFS
DOWN
UP
PFS
OFFSET
CONTROLLER
FINE
COARSE
Figure 1-17 PFS Offset Controller
* The offset controller body is magnetically attached to the base plate.
Use caution when lifting PFS Offset Controller, as the base plate may
become detached and fall.
DICHROIC MIRROR - IN/OUT lever
(dichroic mirror operation lever)
Optical component housing
(Do not place items on the box.
Do not apply excessive force.)
Objective sockets (x6)
DIC prism ports (x6)
Interface cable
(Connect to OFFSET connector
on the Ti-E microscope body.)
Base plate
(detachable, magnetic)
FINE/COARSE selector switch
4x and 10x objectives can be
operated in FINE mode only.
The FINE/COARSE selector
switch will be disabled for
these objectives.
Offset dial
Mounting screws
Main body connection cable
(bottom)
To Next Page
Loading...
Need help?
General
