5-2SectionConnecting to the Host’s RS-232C Port
99
CS1G-CPU44H CS1G-CPU45H
CS1H-CPU63H CS1H-CPU64H
CS1H-CPU65H CS1H-CPU66H
CS1H-CPU67H
CJ1G-CPU44 CJ1G-CPU45
CQM1H-CPU51 CQM1H-CPU61
C200HE-CPU32-(Z)E C200HE-CPU42-(Z)E
C200HG-CPU33-(Z)E C200HG-CPU43-(Z)E
C200HG-CPU53-(Z)E C200HG-CPU63-(Z)E
C200HX-CPU34-(Z)E C200HX-CPU44-(Z)E
C200HX-CPU54-(Z)E C200HX-CPU64-(Z)E
C200HX-CPU65-ZE C200HX-CPU85-ZE
Usable Cables with Attached Connectors:
• For Host Link, 1:1 NT Link, or 1:N NT Link (+5 V power supplied from PC)
XW2Z-070T-1 (9-pin to 9-pin, 0.7 m)
XW2Z-200T-1 (9-pin to 9-pin, 2 m)
SJ46006-102 (9-pin to 9-pin, 1 m)
SJ46006-202 (9-pin to 9-pin, 2 m)
6
5
9
1
6
5
9
1
Shield
Abbreviation
FG
–
SD
RD
RS
CS
+5V
–
–
SG
Pin number
Connector
hood
1
2
3
4
5
6
7
8
9
(9-pin
connector)
NT-AL001 PC
RS-232C
connector
RS-232C
connector
Pin number
Connector
hood
1
2
3
4
5
6
7
8
9
Abbreviation
FG
–
SD
RD
RS
CS
+5V
–
–
SG
(9-pin
connector)
Since the CS1G/H(-H), CJ1G, CQM1H, and C200HX/HG/HE(-Z)E have a
+5 V output, no external power supply is required for the NT-AL001.
5-2-3 Recommended Connectors, Cables, and Crimp Terminals
Connectors and Cables Recommended for RS-232C
When
making an RS-232C connecting cable,
as far as possible use the recom
-
mended
parts indicated in the table below
. Some Units come supplied with one
connector and connector hood.
Check the required parts and prepare them in advance.
Name Model Maker Delivered with
Connector
set
XM2S-0911-
S003
OMRON 9-pin connector
Connector and Connector
hood
Connector XM2A-0901
9-pin connector
Made by OMRON
Connector
hood
XM2S-0911
9-pin connector
Made by OMRON
To Next Page
Loading...
Need help?
General
