6-4SectionMemory Initialization
111
Clear
the screen data by following the menu operations from the Maintenance
Mode Menu as shown below.
Select Memory Init..
Select Screen Data.
Select Y
es.
The
screen data is cleared. During clear
-
ance, the message Erasing Now
... is dis
-
played.
If No is selected, the NT21 returns to the MEMOR
Y INIT
. MENU
screen
without
clearing the screen data.
On
completion of screen data clearance, the NT21 returns to the MEMOR
Y INIT
.
MENU screen.
After
the screen data has been cleared, if an attempt is made to set the NT21 to
the RUN mode before screen data has been transmitted from the NT Support
Tool
or Memory Unit,
an error message will be displayed and the RUN mode will
not be established.
To Next Page
Loading...
Need help?
General
