To Next Page

To Previous Page

6-4SectionMemory Initialization

110

6-4 Memory

Initialization

The NT21 has the following initialization functions. Use them as necessary.

• Clearing screen data Page 110

• Initializing memory tables Page 114

• Initializing memory switches Page 116

• Initializing display history record data Page 112

• Initializing alarm history record data Page 113

• Initializing recipe tables Page 117

Reference: If

writing to the screen data memory is prohibited by

the System Setting setting in

the System Installer mode, memory initialization is not possible.

6-4-1 Clearing Screen Data

Use

this

function if the screen data has been corrupted and the NT21 cannot be

started up correctly.

This

operation clears (initializes) only the screen data and contents of the math

ematical

table. The memory switch settings, display history data, alarm history

record data, and recipe data are retained.

Reference: S When this function is used, all of the screen data contents registered in the

NT21

up to that point are cleared.

Check that the created screens are backed

up at the NT Support Tool before using it.

S The

screen data

can be cleared in the System Installer mode too (page

119).

S The following types of data can be initialized individually.

Contents of numeral and character string memory tables (page 113)

Memory switch settings (page 114)

Display history record data (page 112)

Alarm history record data (page 113)

Recipe data (page 117)

Omron NT21 Setup Manual

Other manuals for Omron NT21