A
Software and Hardware Requirements for Library Features A-1
A
Software and Hardware Requirements for
Library Features
Media Validation
■ High-memory HBT card
– If using RE, both HBT cards should be high-memory
■ Minimum FRS_8.31 and SLC FRS_6.25
■ See also: "Media Validation Requirements" on page 11-1
Partitioning
■ Minimum FRS_7.01 and SLC 5.50 (for single library partitioning)
■ Minimum FRS_8.31 and SLC 6.25 (for library complex partitioning)
– ACSLS 8.3, HSC 6.2: PTF L1H16SG (VM), ELS 7.0: PTF L1H15SI (MVS), ELS
7.1: PTF L1H16SJ, ELS 7.2: integrated
Redundant Electronics
■ Minimum FRS_6.00 and SLC version 4.65
■ See also: "Redundant Electronics Requirements" on page D-1
Enabling ADI Mode
■ High-memory HBT
– If using RE, both HBT cards must be high-memory
■ Minimum FRS_8.36
Sending Rich Drive Data to STA
■ A high-memory HBT is required for T10000 drives running TTI 5.40+ to send all
data to STA. Without a high-memory HBT, the drives operate normally, but STA
only receives basic data.
To Next Page
Loading...
Need help?
General