Oracle StorageTek SL8500 User Manual

config
B-6 StorageTek SL8500 Library Guide
cleaning driveWarning set { on | off }
Sets the drive cleaning warning flag to either on or off.
■ on - the drive health status will be set to warn if it needs cleaning
■ off - the drive health status is not affected if the drive needs cleaning
config
This command will either display the current physical library configuration or set
library configuration parameters.
config
Displays help for the config command, the same as "help config".
config complexId set {1 - 127}
Sets the complexId used for SDP for just the library in which the command is
executed. If more than one library exists in a complex, the complexId must be set
individually for each library in the complex.
config complexId set {1 - 127} <library address>
Sets the complexId used for SDP for a remote library. If more than one library exists in
a complex, the complexId must be set individually for each library in the complex.
■ <library address> - specifies the library in library, rail, column, side, row format. For
example: 2, 0, 0, 0, 0.
config complexId clear
Clears the complexId number for a library. This command will restart the network
stack and cause the SDP ILC IP address to stop responding.
config complexId clear <library address>
Clears the complexId number for a remote library. This command will restart the
network stack and cause the SDP ILC IP address to stop responding.
■ <library address> - specifies the library in library, rail, column, side, row format. For
example: 2, 0, 0, 0, 0.
config complexId print
Displays the current complexId for the library in which the command is executed.
config ilc print
Display the ilc status.
config ilc {enable | disable}
Enables or disables the Inter-Library Communications (ILC) LAN. If a disable is
requested, the library must first be taken offline using the "accessState offline <device
address>" command.
config libraryId print
Displays the current library identifier for this library.
config libraryId set {1 - 32}
Sets the libraryId with a value from 1-32. The library must be offline for this command.
config print
Displays the current physical library configuration.

Oracle StorageTek SL8500 Specifications

General

Brand	Oracle
Model	StorageTek SL8500
Category	Storage
Language	English