reControl
B-12 StorageTek SL8500 Library Guide
reControl
This command controls/switches the redundant electronics and retrieves the library
controller redundant electronics statuses.
reControl
Displays help for the reControl command, same as "help reControl".
reControl status [ <library address> | * ]
Retrieves the redundant electronics status.
■ <library address> - specifies the library in library, rail, column, side, row format. For
example: 2, 0, 0, 0, 0.
■ * - retrieves status from all libraries in a complex
snmp
This command configures the Simple Network Management Protocol (SNMP). For
more information, see the SNMP Reference Guide on OTN.
ssh
This command controls configuration for the ssh daemon/server which resides on the
HBC. This is the protocol utility which SLC and other various applications use to
connect to the library controller.
ssh print
Prints the current ssh daemon protocol settings.
ssh set version1and2
Sets the ssh daemon protocol restriction to v1 and v2. (this is the default). The ssh
server is restarted.
ssh set version2
Sets the ssh daemon protocol restriction to v2 only.
time
This command sets the library time in military time notation.
time
Displays help for the time command, same as "help time".
time print
Displays the current system time.
time <HH> : <MM>
Sets the system time. Resolution is within one minute. In a library complex, the library
with libraryId = 1 is the master. Change the time on the master library.
■ <HH> - two digit hour
■ <MM> - two digit minute
time <HH> : <MM> : <SS>
Sets the system time. Resolution is within one second. In a library complex, the library
with libraryId = 1 is the master. Change the time on the master library.
To Next Page
Loading...
Need help?
General