cleaning
Command Line Interface Reference B-3
Example:
SL8500> audit multiRowScan print 1,1,0,1,0
requestId
requestId 8401
Attributes Multi Row Scan enabled
Object Robot 1,1,0,1,0
Done
Failure Count 0
Success Count 1
COMPLETED
capCommand
This command is for managing CAPs.
capCommand
Displays help for the capCommand command, the same as "help capCommand".
capCommand <enable|disable> <device_address>
Enables or disables a CAP on a rail (for bulk CAP only). Certain situations may
prevent a CAP from being disabled, such as a reservation by a host.
■ <device address> - specifies the CAP to release in library, rail, column, side, row
format.
capCommand forceUnreserve <device address>
Forces the release of a CAP. If cartridges are in the CAP, the reservation changes to
"default". If there are no cartridges in the CAP, the reservation changes to "none".
■ <device address> - specifies the CAP to release in library, rail, column, side, row
format.
capCommand {lock | unlock} <device address>
Locks or unlocks a CAP specified by the device address.
■ <device address> - specifies the CAP to lock/unlock in library, rail, column, side,
row format.
cleaning
This family of commands displays and controls cleaning and diagnostic
cartridge-related functions within the library. Only customers with the media
validation feature should use these commands.
cleaning
Displays help for the cleaning command, the same as "help cleaning".
cleaning list cleaning
Lists all cleaning cartridges in the system slots.
Example:
SL8500> cleaning list cleaning
requestId
requestId 9001
Attributes Expired false
Label CLN0080U
Location 1,1,-52,1,13
Max Usage Count 100
To Next Page
Loading...
Need help?
General