• *
If you do not enter an entry code when making the conference group call, extensions/outside
telephones can join the conversation without needing to enter an entry code.
• Entry codes can consist of the digits "0" through "9". When "
"
is used for an entry code, no
one can join a conversation that is already in progress. "
" must be used by itself (i.e., you
may not combine it with numeric digits). For details, refer to
"
Join After Time Out".
• A conversation can be established with a maximum of 8 parties
(including the caller).
• If the Hands-free Answerback feature is enabled, the called extension can answer the
conference group call without going off-hook. KX-UT series SIP phones do not support the
Hands-free Answerback feature for a conference group call.
• With PTs and KX-WT125 (Canada only)/KX-TCA175/KX-TCA275/KX-TCA185/KX-TCA285/
KX-TCA385 PSs, a conference group call can be automatically answered without going
off-hook. This mode is selected through system programming.
• If using an SLT or SIP phone, the caller can only originate a conference group call and cannot
control the called parties’ call status manually.
For a caller
To end a conversation with a specific party
PT/PS
To end a conversation with a specific party
During a conversation
(DSS)
Press DSS.
To end a conversation with the party who
joined the conversation last
Press TRANSFER.
To disconnect the party who joined the
conversation last from the conference group call
Press FLASH/RECALL.
• In this case, the FLASH/RECALL button must be set to Flash/Recall mode through system
programming.
Broadcast Mode
If
this mode is selected through system programming, the caller can call multiple parties in a conference group,
make a voice announcement, and then establish a multiple party conversation with the called parties. This
134 User Manual
1.7.3 Making a Conference Group Call
To Next Page
Loading...
Need help?
General