Press Check-in. Dial extension number and then press
"ENTER", or press desired DSS.
OR
extension no.
(DSS)
While on-hook
ENTER
Display PT
Press "YES".
Press "EXIT"
or Check-in.
YES
EXIT
OR
(Check-in)
(Check-in)
• After check
-in, Remote Extension Dial Lock is deactivated, and the guest can make outside
calls from the room extension. (Refer to "2.1.1 Extension Control".)
• After check-in, all billing data previously charged to the extension will be cleared
automatically.
• When the room status of extensions is changed, detailed room status information is recorded
automatically. This requires system programming.
<Example>
Date Time Ext CO Dial Number
03:07PM
1234 Check in
02/02/00
Check-out
The hotel operator can change the room status of extensions to check
-out by using the Check-out button
assigned on his/her extension.
Depending on the setting of the PBX, the hotel operator can do the following:
• Record/edit charges for Minibar/Others
• Print out an invoice containing charge information
236 User Manual
1.12.1 Using the Telephones in a Hotel-type Environment (Hospitality Features)
To Next Page
Loading...
Need help?
General