1.14 Using a Telephone with a Display
1.14.1 Using the Call Log
This is available for display proprietary telephones, portable stations, and
KX-UT series SIP phones.
–
Calling with the Incoming Call Log
– Calling with the Outgoing Call Log
• PS users: Refer to the documentation for your phone.
• KX-UT series SIP phone users: Both outside call information and intercom call information
is recorded automatically in the incoming call log. For details about using the call log, refer
to the documentation for your KX-UT series SIP phone.
• The following PSs can use the incoming call log information in the same way as a wired PT
when they receive a call from other extension
(including TIE).
KX-TCA185/KX-TCA285/KX-TCA385
• PSs other than these may not display the same incoming call log information as a PT
connected to the PBX.
• For details about referencing the incoming call log, refer to the PS’s documentation.
Calling with the Incoming Call Log
When you receive a call, including external sensor calls, call information is recorded automatically in the
incoming call log. A preprogrammed number of calls can be logged per extension.
When the call log is full and other call arrives, the oldest call is deleted.
You can modify the logged telephone number.
When the Call Log button light turns on, there is a call which you did not answer.
The following information is logged.
• Caller’s Name
• Date/Time call received
• Answered or Not Answered
Confirmed or Not Confirmed
• Caller’s Phone Number
To confirm the log information with the Call Log button
To Next Page
Loading...
Need help?
General