PT/SLT/PS/SIP Extn.
Select the desired greeting. When you select "Caller ID Greeting",
enter a Caller ID Greeting Number (1–4). When you select "Absent
Message Greeting", enter an Absent Message Number (1–9).
Enter 41.
Change the greeting
4 1
Delete the selected
greeting
Follow the prompts as necessary.
2
1
3
4
5
No Answer Greeting
Busy Signal Greeting
After Hours Greeting
Caller ID Greeting
Temporary Greeting
Absent Message
Greeting
Follow the prompts as necessary.
Enter 1 to end
recording.
1
3
1
4
Review
Accept
Rerecord the greeting message (repeat the steps above as necessary)
Add to the greeting message you just recorded
Delete the greeting message and exit
Record or delete other greeting
messages as necessary by following
the prompts, or go on-hook.
2
1
3
4
5
No Answer Greeting
Busy Signal Greeting
After Hours Greeting
Caller ID Greeting
Temporary Greeting
Absent Message Greeting
On-hook.
OR
The greeting will be deleted;
go on-hook to finish.
Log in to your mailbox.
Record your greeting message.*
C.Tone
If you go on-hook without accepting your new greeting,
it will not be saved.
6
3
1
6
For Caller ID Greeting, refer to
"Personal Greetings for Caller ID".
OR
absent message no.
2
caller ID greeting no.
• The
contents of the Absent Message Greeting prompt and the absent message displayed on
telephones (refer to "1.6.2 Showing a Message on the Caller’s Telephone Display (Absent
Message)") should be programmed to match through system programming.
146 User Manual
1.8.2 Logging in to and Configuring Your Mailbox