1.2.3 Redial
This is convenient when calling the same outside party again.
– Redialling the Last Number You Dialled (Last Number Redial)
Redialling the Last Number You Dialled (Last Number Redial)
• Up to 32 digits can be stored and redialled.
• After pressing REDIAL, if you hear a busy tone again, press REDIAL to retry.
• If you want to log outgoing intercom calls to the outgoing call log, consult your System
Installer.
• If
you have seized a trunk, pressing the REDIAL button will be ignored if the last number you
dialled was an extension.
• Automatic Redial
To
redial automatically, press the SP-PHONE button and then the REDIAL button, or press
the REDIAL button directly. It will keep trying the busy number until the called party answers
or until a specified timeout.
You can perform other tasks during dialling. To cancel, press the FLASH/RECALL button.
Some outside lines may not support this feature.
This feature is not available for the KX-T7665 or PS.
40 User Manual
1.2.3 Redial
To Next Page
Loading...
Need help?
General