Specifications
3 - 2
Value for Cut-out size of the
parameter "204" bed plate Size of seam pattern
1 7 mm x 7 mm 5 mm x 5 mm
2 8 mm x 8 mm 6 mm x 6 mm
3 9 mm x 9 mm 7 mm x 7 mm
4 10 mm x 10 mm 8 mm x 8 mm
5 11 mm x 11 mm 8 mm x 9 mm
6 10 mm x 14 mm 8 mm x 12 mm
3.02 Seam pattern sizes
When changing part sets parameter "204" must be adapted to the cut-out size
of the bed plate, see Chapter 8.04 Setting the seam pattern size.
If this instruction is not observed there is a risk of severe damage to the
machine!
To Next Page
Loading...
Need help?
General
