Pfaff 3307-1 SERIES User Manual

11 - 8
Input
Parameter input basting seam
P01 First needle entry position
P02 Second needle entry position
P03 Third needle entry position
P05 Total number of stitches (2-99)
P07 This parameter must be set at the value „3“!
P08 End knotting function: I = off, II = on
--
++
P01 0 0
11.02 Seam pattern input on sub-class -4/.. machines
99 programs (basting seams) can be entered and stored under the button type, three-hole
button. The basting seams can be entered when starting up or by entering certain seam
parameters. The basting seam input is described below.
● Activate the sewing mode .
(The LED in the key must be on).
● Select button type and program number, see Chapter 9.04 Selecting the button type
and program number.
● Activate the seam pattern input function.
The first parameter (P01) with the corresponding values is shown on the display.
1
2
3
● Start the first needle entry position (P01) with the corresponding plus/minus keys.
● Confirm input with Enter.
Machine moves automatically to input of the next parameter.
● Start the second needle entry position (P02) with the corresponding plus/minus keys.
● Confirm input with Enter.
Machine moves automatically to input of the next parameter.

Pfaff 3307-1 SERIES Specifications

General

Brand	Pfaff
Model	3307-1 SERIES
Category	Sewing Machine
Language	English