Sewing
10 - 4
10.03 Sewing with sub-class -5/..
Only operate the machine with
cover 1 closed!
Danger of injury due to the
motion of the take-up lever!
Do not operate the machine
without eye shield 2!
Danger of injury from flying
needle or button fragments!
● Insert the needle, see Chapter 9.01
Inserting the needle.
● Thread the needle, see Chapter 9.02
Threading the needle thread.
● Switch on the machine, see Chapter
8.03 Switching the machine on/off.
● Select the button type (self-shank button)
and the corresponding program number,
see Chapter 9.04 Selecting the button
type and program number.
● Place the self-shank button in the button
holder and fix it in position with the
button holding cylinder, see Chapter 7.02
Pedal.
● Place the material under the button holder.
● Lower the button holder with the pedal
and start the sewing operation, see
Chapter 7.02 Pedal.
Fig. 10 - 08
Fig. 10 - 01
1
2
108-005