Transportation, packing and storage
5 - 1
5 Transportation, packing and storage
5.01 Transportation to customer’s premises
All machines are delivered completely packed.
5.02 Transportation inside the customer’s premises
The manufacturer cannot be made liable for transportation inside the customer’s premises,
nor to other operating locations. Care must be taken that the machine is transported in an
upright position. To lift the machine with a suitable lifting appliance, lifting ring 1 delivered
with the machine can be screwed into the threaded hole on the machine.
5.03 Disposal of packing materials
The packing materials of these machines consist of paper, cardboard and VCE-fibre.
Proper disposal of the packing material is the responsibility of the customer.
5.04 Storage
If the machine is not in use, it can be stored as it is for a period of up to six months, but it
should be protected against dust and moisture.
If the machine is stored for longer periods, the individual parts, especially the surfaces of
moving parts, must be protected against corrosion, e.g. by a film of oil.
1
0
4
-0
0
3
Fig. 5 - 01
64-003
1
To Next Page
Loading...
Need help?
General
