9 Stops playback
Searching for a specific scene
and starting playback from a
specified time
You can search for a desired scene by specify-
ing the time.
1 Touch [Search].
2 Touch the keys to input the target num-
ber or time and then touch [Enter].
! To select 5 minutes 3 seconds, touch [5],
[min], [3], [sec] and [Enter] in order.
! To select 71 minutes 00 seconds, touch [7],
[1], [min] and [Enter] in order.
! To select 100 minutes 05 seconds, touch
[1], [0], [0], [5], [sec] and [Enter] in order.
p To cancel an input number, touch [Clear].
To cancel the input numbers, touch and
hold [Clear].
Operating by hardware
buttons
Pressing the TRK button
You can skip files forward or backward.
Pressing and holding the TRK button
You can perform fast reverse or fast for-
ward.
Using advanced functions
1 Tap [USB] or [SD] on the left edge of
the screen to display the “USB” or “SD”
screen.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 70.
2 Touch the screen to display the touch
panel keys.
3 Touch
.
The “Function” menu appears.
p If the touch panel keys are not shown,
touch anywhere on the screen to display
them.
1 2
1 Changes the repeat range
Each touch of [Repeat] changes the setting
as follows:
! Media: Repeats all video files in the se-
lected external storage device (USB,
SD).
! File: Repeats just the current file.
! Folder: Repeats the current folder.
p If you skip the file forward or backward
when the repeat play range in “File”, the
repeat play range changes to “Folder”.
2 Changes the screen size of video
If a video file is played, you can select the
display mode between normal and full
screen.
Each touch of [Video Output Setting]
changes the setting as follows:
! Normal: Enlarges the display size while
maintaining the aspect ratio.
! Full: Displays the image full-screen
although the aspect ratio may be
changed.
En
115
Chapter
23
Playing video files (from USB or SD)
Playing video files (from USB or SD)
To Next Page
Loading...
Need help?
General
