= For details, refer to Storing and recalling
broadcast frequencies on this page.
Operating by hardware
buttons
Pressing the BAND/ESC button
Band can be selected from among FM1, FM2,
FM3,orAM.
Pressing MULTI-CONTROL up or down
You can recall radio stations assigned to pre-
set tuning keys
to .
Pressing MULTI-CONTROL left or right
The frequencies move up or down step by
step.
Pressing and holding MULTI-CONTROL
left or right
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
p You can cancel seek tuning by pressing
MULTI-CONTROL left or right.
Pressing the center of MULTI-CONTROL
The function select screen appears.
Storing and recalling
broadcast frequencies
With a touch of any of the preset tuning keys
to , you can easily store up to six broad-
cast frequencies for later recall (also with the
touch of a key).
1 When you find a frequency that you
want to store in memory, keep touching a
preset tuning key
to until the preset
number (e.g., P.CH1) stops flashing.
The selected radio station has been stored in
memory.
2 Touch the same preset tuning key
to
.
The radio station frequencies are recalled from
memory.
Using the function menu
1 Display the “Function Menu” screen.
= For details of the operation, refer to Display-
ing the “Function Menu” screen on page
81.
2 Turn MULTI-CONTROL to select a func-
tion.
Turning MULTI-CONTROL switches between
the functions in the following order:
BSM (best stations memory) — Local (local
seek tuning) — Seek Mode (seek mode) —
Blending (reception mode)
Storing the strongest
broadcast frequencies
“BSM” (best stations memory) lets you auto-
matically store the six strongest broadcast fre-
quencies under the preset tuning keys
to
and, once stored there, you can tune in to
these frequencies with the touch of a key.
1 Display the “Function Menu” screen.
= For details of the operation, refer to Display-
ing the “Function Menu” screen on page
81.
2 Turn MULTI-CONTROL to display
“BSM”.
3 Press the center of MULTI-CONTROL to
begin a search.
“Searching” begins to flash. While “Search-
ing” is flashing, the six strongest broadcast
frequencies will be stored under the preset
tuning keys
to in order of their signal
strength. When this is complete, “Searching”
stops flashing.
p To cancel the storage process, press the
center of MULTI-CONTROL again.
p Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved by using
to .
En
85
Chapter
17
HD Radio
™
reception
HD Radio
™
reception
To Next Page
Loading...
Need help?
General
