p If registration fails, repeat the procedure
from the beginning.
8 Touch [OK].
Searching for a specified phone
If you cannot connect your phone using
“Search devices” and “Pair from the mobile
phone”, try this method if your phone is found
in the list.
1 Activate the Bluetooth wireless tech-
nology on your cellular phone.
For some cellular phones, no specific action is
necessary to activate Bluetooth wireless tech-
nology. For details, refer to the instruction
manual of your cellular phone.
2 Display the “Phone Menu” screen.
= For details of the operations, refer to Dis-
playing the phone menu on page 59.
3 Touch [Setting] on the “Phone Menu”
screen.
The “Bluetooth Settings” screen appears.
4 Touch [Connections].
The “Connection List” screen appears.
5 Touch [Add].
The “Add Device” screen appears.
6 Touch [Select specific devices].
The “Select specific devices” screen appears.
7 Touch the model name of the cellular
phone to be connected.
The system searches for cellular phones fea-
turing Bluetooth technology that are ready for
the connection and displays them in the list if
the device has been found.
p If you cannot find the desired model name
on the list, touch [Other phones] to search
the cellular phones available nearby.
8 Wait until your cellular phone appears
in the list.
p If you cannot find the cellular phone you
want to connect, check that the cellular
phone is ready for the Bluetooth wireless
technology connection.
9 Touch the cellular phone name you
want to register.
A message prompting you to enter a PIN code
appears.
10 Enter the PIN code “1111” using the cel-
lular phone.
When a connection is successfully estab-
lished, a connection complete message ap-
pears. The screen returns to the “Bluetooth
Settings” screen by touching [OK].
En
62
Chapter
12
Using hands-free phoning
To Next Page
General
