Using the USB interface cable for iPod en-
ables you to connect your iPod to the naviga-
tion system.
p A USB interface cable for iPod (CD-IU51V)
(sold separately) is required for connection.
Starting procedure
1 Display the AV operation screen.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 70.
2 Connect your iPod.
The source changes and then playback will
start.
= For details, refer to Connecting your iPod on
page 20.
p If the iPod is already connected, tap [iPod]
on the left edge of the screen.
= For details, refer to Selecting a source
on page 70.
p If no video is output when iPod is selected
as AV source, check the setting in “AV1
Input” on the “AV System Settings” menu.
= For details, refer to Setting video input 1
(AV1) on page 170.
3 Use the touch panel keys on the screen
to control your iPod.
= For details of the operation, refer to Using
the touch panel keys on page 118.
Reading the screen
Music
6
5
1
2
3
4
Video
6
7
17 3
1 Playback condition indicator
Indicates the current playback condition.
Setting the shuffle play
Indicator Meaning
Cancels the shuffle play.
Plays back songs or videos in
random order within the se-
lected list.
Selects an album randomly, and
then plays back all songs in that
album in order.
The actions while this indicator
is displayed on the video opera-
tion screen vary depending on
the connected iPod.
Setting a repeat play range
Indicator Meaning
Repeats all songs or videos in
the selected list.
Repeats just the current song or
video.
2 Current song (episode) information
! : Artist name (podcast title)
Shows the artist name currently playing.
When a podcast is played, the podcast
title is displayed (when available).
!
: Album title (release date)
Shows the title of the album for the
song. When a podcast is played, the re-
lease date is displayed (when available).
!
: Song title (episode)
En
116
Chapter
24
Using an iPod (iPod)
To Next Page
General
