2 Touch [Demo Mode].
Each time you touch the key changes the set-
ting.
! On:
Repeats the demonstration guidance.
! Off (default):
The demonstration guidance is set off.
Restoring the default setting
Resets various settings registered to the navi-
gation system and restores them to the default
or factory settings.
p Some data remains. Be sure to read Setting
items to be deleted first.
= For detailed information about the items
which would be erased, refer to Setting
items to be deleted on page 133.
1 Display the “Settings Menu” screen.
= For details of the operations, refer to Dis-
playing the “Settings Menu” screen on
page 115.
2 Touch [F. Reset].
The message confirming whether to restore
the settings appears.
3 Touch [Yes].
Turning off the screen
By turning off the backlight of the LCD screen,
you can turn off the screen display without
turning off the voice guidance.
1 Display the “Settings Menu” screen.
= For details of the operations, refer to Dis-
playing the “Settings Menu” screen on
page 115.
2 Touch [Screen Off].
The screen is turned off.
p Touch anywhere on the screen to turn it
back on.
Displaying the
“Initial Setting” screen
To customize the initial settings, display the
“Initial Setting” screen.
1 Press the MODE button when the map
of the current location is displayed.
The audio operation screen appears.
2 Press and hold the SRC/OFF button
until the audio source turns off.
= For details, refer to Switching the audio
source on page 79.
3 Press the center of MULTI-CONTROL
and hold until the initial setting screen ap-
pears.
1 Screen title
2 Function currently selected
3 Setting value
4 Turn MULTI-CONTROL to select one of
the initial settings.
Turning MULTI-CONTROL switches between
the functions in the following order:
RGB Illumination (illumination setting) —
AUX (auxiliary input) — S/W Control (sub-
woofer controller) — Preout (rear output con-
troller) — Guidance (sound muting/
attenuation)
En
124
Chapter
26
Customizing preferences
To Next Page
Loading...
Need help?
General
