Pioneer SC-LX904 User Manual

131
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Using the AV Direct mode
AV Direct can improve sound quality by limiting the activity of digital circuits and
thereby suppressing the noise that is generated by them. You can choose from
“AV Direct” which temporarily stops communications such as via the network,
Bluetooth, and USB, and “AV Direct Net Off” which turns off the power for some
digital circuits. Either one can be used to play the audio from external devices
connected to the input terminals on this unit.
• This function is not available with a source to which a Sonos Connect (
p115) is connected.
Using “AV Direct”
1. Press the “AV DIRECT” button on the remote controller to turn “AV Direct”
“On”. To turn “Off”, press the “AV DIRECT” button again.
• “AV Direct” automatically switches off when you perform any of the following
operations:
– Set this unit to standby.
– Switch the input source to “NET”, “BLUETOOTH”, “USB”, or “TUNER”.
– Select a source to which a Sonos Connect (
p115) is connected.
– Display the Setup menu.
– Switch the multi-zone function on.
• Depending on the functions used, the track name may be displayed on the
display and “Off” for “AV Direct” may not be displayed.
Using “AV Direct Net Off”
1. While pressing and holding ZONE CONTROL on the main unit, press STATUS
so that “AV Direct Net Off” appears on the display of the main unit. The power
of some of the digital circuits are turned “Off”.
• “AV Direct Net Off” is automatically canceled when you perform any of the
following operations:
– Set this unit to standby.
–
Switch the input source to “NET”, “BLUETOOTH”, “USB”, or “ TUNER ”.
– Select a source to which a Sonos Connect ( p115) is connected.
– Display the Setup menu.
– Switch the multi-zone function on.

Pioneer SC-LX904 Specifications

General

Brand	Pioneer
Model	SC-LX904
Category	Receiver
Language	English