Pioneer SC-LX904 User Manual

157
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
displayed instead.
(Zone 2)
Setting Item Default Value Setting Details
Input Selector --- Displays the input selector that has been set.
Network Service --- Displays the Network Service that has been set.
Band --- Displays the band, "AM" or "FM" that has been set.
Station --- Displays the Preset Name of the radio station that
has been set.
• "Band" is displayed only when the input selector is set to "TUNER".
• "Station" is displayed only when the input selector is set to "TUNER" or "NET".
• "Network Service" is displayed only when the input selector is set to "NET".
• Preset Name of "Station" (only when the input selector is set to "TUNER") is displayed with the
name set by "Source" - "Name Edit". If the name is not set, the frequency of the radio station is
displayed instead.
(Zone 3)
Setting Item Default Value Setting Details
Input Selector --- Displays the input selector that has been set.
Network Service --- Displays the Network Service that has been set.
Band --- Displays the band, "AM" or "FM" that has been set.
Station --- Displays the Preset Name of the radio station that
has been set.
• "Band" is displayed only when the input selector is set to "TUNER".
• "Station" is displayed only when the input selector is set to "TUNER" or "NET".
• "Network Service" is displayed only when the input selector is set to "NET".
• Preset Name of "Station" (only when the input selector is set to "TUNER") is displayed with the
name set by "Source" - "Name Edit". If the name is not set, the frequency of the radio station is
displayed instead.
Speaker
 Conguration
Change the settings of connection environment of the speakers.
Setting Item Default Value Setting Details
Speaker
Channels
7.1.4 ch Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch",
"7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", "5.1.2 ch",
"6.1.2 ch", "7.1.2 ch", "4.1.4 ch", "5.1.4 ch", "6.1.4
ch" or "7.1.4 ch" to suit the number of speaker
channels connected.
Subwoofer 2ch Set the PRE OUT SUBWOOFER jacks which
output audio signals.
"2ch": Both the PRE OUT SUBWOOFER 1 jacks
and the PRE OUT SUBWOOFER 2 jacks output
audio signals.
"1ch": Only the PRE OUT SUBWOOFER 1 jacks
output audio signals.
"No": Neither the PRE OUT SUBWOOFER 1 jacks
nor the PRE OUT SUBWOOFER 2 jacks output
audio signals.

Pioneer SC-LX904 Specifications

General

Brand	Pioneer
Model	SC-LX904
Category	Receiver
Language	English