Pioneer SC-LX904 User Manual

177
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
 Preamp Mode
If speakers are connected to the PRE OUT jacks on this unit via a power
amplier, you can reduce the power consumed by this unit by turning off the
power supplied to the SPEAKERS terminals you are not using on this unit.
Setting Item Default Value Setting Details
Preamp Mode No Select the SPEAKERS terminals whose power you
want to turn off.
"No": Power is supplied to all SPEAKERS
terminals.
Select when a power amplier is not connected.
"Front": Turns off the power for the SPEAKERS
terminals for the front speakers.
"Front + Center": Turns off the power for the
SPEAKERS terminals for the front speakers and
center speaker.
"All": Turns off the power for all SPEAKERS
terminals. Select when this unit is to be used as the
pre-amplier.
• This setting cannot be selected when bi-amp
connection is used for front speakers. Only
"Front" can be selected when bi-amp connection
is used for the center speaker and surround
speakers.
 Firmware Update
Change the settings for Firmware Update.
Setting Item Default Value Setting Details
Update Notice Enable Availability of a rmware update is notied via
network.
"Enable": Notify updates
"Disable": Do not notify updates
Version - The current rmware version is displayed.
Update via
NET
- Press ENTER to select when updating the rmware
via network.
• This setting cannot be selected if you do not
have Internet access or there is no updatable
rmware.
Update via
USB
- Press ENTER to select when updating the rmware
via USB.
• This setting cannot be selected if a USB storage
device is not connected or there is no updatable
rmware in the USB storage device.
• Wait for a while if "Firmware Update" cannot be selected. It can be selected when the
network function is activated.
 Initial Setup
Make the initial setup from the setup menu.
• Wait for a while if "Initial Setup" cannot be selected. It can be selected when
the network function is activated.
 Lock
Lock the Setup menu so that the settings cannot be changed.
Setting Item Default Value Setting Details
Setup Parameter Unlocked Lock the Setup menu so that the settings cannot be
changed.
"Locked": The menu is locked.
"Unlocked": The menu is unlocked.

Pioneer SC-LX904 Specifications

General

Brand	Pioneer
Model	SC-LX904
Category	Receiver
Language	English